[Dec-2024] Autodesk Certified Professional ACP-01101 Exam Practice Test Questions Dumps Bundle!
2024 Updated ACP-01101 PDF for the ACP-01101 Tests Free Updated Today!
Autodesk ACP-01101 certification exam is a valuable asset for professionals seeking to validate their skills and knowledge in using AutoCAD for drafting and design. It is recognized by the software developer and is a valuable asset for professionals seeking career advancement in the drafting and design industry. By preparing for and achieving this certification, professionals can demonstrate a high level of proficiency in using AutoCAD, and employers can benefit from having certified professionals on their team.
NEW QUESTION # 56
Exhibit.
A CAD designer is working on a proposed building addition. The building is oriented on the site at an angle as shown in the exhibit (left).
Without rotating any geometry how should the CAD designer orient the drawing so that it is orthogonal to the screen as shown in trio exhibit on too right?
- A. Type PLAN and use me Current UCS option
- B. Type PLAN and set the UCS to World
- C. Type UC5 and set the UCS to View
- D. Type UCS and set lo Previous
Answer: A
Explanation:
* Identify the Current UCS:
* Before changing the view, ensure that the UCS (User Coordinate System) is correctly oriented with the angled geometry.
* If necessary, use the UCS command to align the UCS with the angled building addition.
* Use the PLAN Command:
* Type PLAN in the command line and press Enter.
* When prompted, choose the Current UCS option. This option adjusts the view so that it becomes orthogonal (aligned) to the current UCS.
* Result:
* The drawing will now be oriented orthogonally on the screen, as shown in the exhibit on the right, without rotating any actual geometry.
References:
* AutoCAD Documentation on the PLAN command: PLAN Command
NEW QUESTION # 57
You need to snap to the centroid of a closed polyline.
Which Object Snap mode should you use? Click the correct option in the answer area.
Note: Exhibit shown is the AutoCAD interface in Windows. While the AutoCAD for MAc version differs in appearance, the correct answer correlates in the options.
Answer:
Explanation:
Explanation:
object snaps are modes that allow you to snap to specific points on objects. To snap to the centroid of a closed polyline, you should use the Geometric Center object snap mode. This mode will display an asterisk (*) marker when you move the cursor over the geometric center of a closed polyline or spline.
To use this mode, you can either:
* Click on the Object Snap icon in the Status bar and select Geometric Center from the menu.
* Type GCE at the command prompt or when prompted for a point and press Enter.
Now you can snap to the centroid of a closed polyline by using Geometric Center object snap.
NEW QUESTION # 58
You need to create a hatch pattern that looks the same regardless of the viewport scale.
What should you do?
- A. Set the default hatch pattern
- B. Create an associative hatch
- C. Set the current hatch scale by using the HPSCALE system variable
- D. Create an annotative hatch
Answer: D
Explanation:
Explanation
an annotative hatch is a hatch that automatically adjusts its scale and size to match the viewport scale. This means that the hatch pattern will look the same regardless of how you zoom in or out of the viewport.
To create an annotative hatch, you need to:
* Set the annotation scale tool to 1:1
* Create your hatch as usual
* In the properties palette, make the hatch annotative
* Add annotation scales to the hatch as needed
This will create a hatch that displays correctly at different viewport scales.
https://forums.autodesk.com/t5/autocad-forum/annotative-hatch/td-p/2651268
NEW QUESTION # 59
A CAD designer adds the Annotation Scale tool to the status bar During their work, the designer notices that it Is no longer visible What is causing, this issued?
- A. The designer Is in model space
- B. The designer is in paper space.
- C. The geometry Is outside of the drawing limits
- D. The designer's user interface is locked
Answer: A
Explanation:
* Check the Active Space:
* The Annotation Scale tool is only visible when the user is in model space.
* Ensure that you are currently working in model space by checking the status bar or the workspace tab.
* Switch to Model Space:
* If you are in paper space (layout view), switch to model space by double-clicking inside a
* viewport or selecting the 'Model' tab at the bottom of the drawing area.
* Verify the Annotation Scale Tool:
* The Annotation Scale tool should now be visible in the status bar.
* If it is still not visible, right-click on the status bar, go to 'Customization,' and ensure 'Annotation Scale' is checked.
References:
* AutoCAD Documentation on Annotation Scale: Annotation Scale
Thank you for your engagement! Join our VIP AI Discord community at SmartPrompt for AI news and custom prompts for passive income opportunities with business automation.
NEW QUESTION # 60
Exhibit.
A CAD designer attaches a contour drawing as an external reference and notices an additional drawing reference is also attached.
How should the Buildings drawing be removed from the C-3 drawing? Note Mac commands shown m parentheses
- A. Open the Contours drawing file, right-click (Control-click) the Buildings reference, and change the Path Type to Remove Path.
- B. Right-click (Control-click) the Buildings reference and select the Detach option
- C. Open the Contours drawing file, right-click (Control-click) the Buildings reference, and change the Xref Type to Overlay.
- D. Right-click (Control-click) the Buildings reference and change the Xref Type to Overlay
Answer: B
Explanation:
* Understanding External References:
* External references (Xrefs) allow you to attach drawing files within your current drawing, enabling collaborative work and data sharing.
* Xrefs can be attached as Overlay or Attachment. Overlays do not include nested Xrefs, while Attachments do.
* Identifying the Problem:
* The exhibit shows that the Buildings drawing is nested within the Contours Xref.
* To remove the Buildings drawing from the C-3 drawing, it must be detached from the Xref hierarchy.
* Steps to Detach Xref:
* Right-click (Control-click) the Buildings reference in the Xref Manager.
* Select the Detach option. This will remove the Buildings reference from the drawing.
* Conclusion:
* To remove the Buildings drawing from the C-3 drawing, detach the Buildings reference directly from the Xref Manager.
References:
* AutoCAD User Guide on Managing Xrefs.
* AutoCAD Help Documentation on Detaching Xrefs.
NEW QUESTION # 61
Select whether each statement is True or False.
Answer:
Explanation:
Explanation:
True
1. According to the AutoCAD for Design and Drafting documents1, a polyline is a connected sequence of line segments created as a single object. You can create straight line segments, arc segments, or a combination of the two2341. Therefore, the correct answer is True. A polyline can include both straight line segments and arc segments.
2. False.According to the AutoCAD for Design and Drafting documents1, a spline is a smooth curve that passes through or near a set of fit points, or that is defined by the vertices in a control frame. A spline does not have a constant radius, but rather a local radius at each point on the curve2. Therefore, AutoCAD cannot directly dimension or display a radius of a spline curve23. You can use some workarounds such as exploding the curve to arc segments with the FLATTEN command2, or creating a polyline over the top with arc active3, but these may not be accurate or desirable. Therefore, the correct answer is False. The radius on a spline cannot be found in AutoCAD properties.3. TrueAccording to the AutoCAD for Design and Drafting documents1, a 2D polyline is a connected sequence of line segments created as a single object. You can specify an elevation for a 2D polyline using the Edit Polyline Elevations command2. However, this command will assign the same elevation to all vertices of the polyline2. Therefore, you cannot assign different elevations to different segments or points of a 2D polyline. Therefore, the correct answer is True. You can assign only one elevation to a 2D polyline.
NEW QUESTION # 62 
You have a line segment that is 150 units long as shown in the exhibit.
You need the line to be 200 units long without adding any additional linework. The leftmost end of the line must remain in the current position.
What should you do?
- A. From the Edge Extension option of the Extend command, enter 50 units, and then select the right end of the line
- B. From the Delta option of the Lengthen command, enter 200 units and then select the right end of the line
- C. From the Project option of the Extend command, enter 50 units, and then select the right end of the line.
- D. From the Delta option of the Lengthen command, enter 50! units and then select the right end of the line
Answer: D
Explanation:
From the Delta option of the Lengthen command, enter 50 units and then select the right end of the line. This way, you can increase the length of the line by 50 units from its current endpoint without changing its direction or position2
https://www.learnvern.com/autocad-tutorial-in-hindi/how-to-use-lengthen-command
NEW QUESTION # 63
You need to convert the two sets of parallel lines shown in 1 into the objects shown in 2 without repeating the command.
What should you use?
- A. The FILLET command with the Polyline option
- B. The CHAMFER command with the Multiple option
- C. The CHAMFER command with the Polyline option
- D. The FILLET command with the Multiple option
Answer: B
Explanation:
According to the AutoCAD for Design and Drafting documents, the CHAMFER command creates a beveled corner between two lines, while the FILLET command creates a rounded corner between two lines. Both commands can be used with the Polyline option to apply chamfers or fillets to all corners of a 2D polyline1.
However, in this case, the lines are not polylines but separate line segments. Therefore, using the Polyline option will not work. Instead, you can use the Multiple option to chamfer or fillet multiple sets of lines without restarting the command2.
NEW QUESTION # 64
You have the drawing shown in the exhibit.
You need to place the polygon and the rectangle on the same layer as the circle.
Which command should you use to complete the task in the least number of steps?
- A. Copy
- B. ByLayer
- C. Match Properties
- D. Make Current (LAYMCUR)
Answer: C
Explanation:
Explanation
match properties is a command that allows you to apply the properties of one object to another object. You can use this command to change the layer of an object by selecting an object on the desired layer as a source.
To use this command, you can either:
* Click on the Match Properties icon in the Properties panel of the Home tab.
* Type MATCHPROP at the command prompt and press Enter.
Then, you can follow these steps:
* Select an object on the same layer as the circle as a source object and press Enter.
* Select the polygon and the rectangle as destination objects and press Enter.
Now you have placed the polygon and the rectangle on the same layer as the circle.
NEW QUESTION # 65
Exhibit.
The exhibit shows the drawing scales available in the current drawing.
The drawing units Length type is set to decimal.
A CAD designer needs to add a 1" = 120' drawing scale.
Which drawing and paper units should be entered in the Add Scale dialog to create the required drawing scale?
- A. Drawing units to 120 and paper units to 15
- B. Drawing units to 960 and paper units to 120.
- C. Drawing unite to 1 and paper units to 120
- D. Drawing units to 120 and paper units to 1.
Answer: C
Explanation:
* Access the Add Scale Dialog:
* Open the 'Edit Drawing Scales' dialog by clicking on the scale list in the status bar or through the SCALELISTEDIT command.
* Add a New Scale:
* Click on the Add button to open the 'Add Scale' dialog.
* In the 'Add Scale' dialog, you will need to specify the drawing units and paper units for the new scale.
* Enter the Required Scale Values:
* For a scale of 1" = 120', set the Drawing Units to 1 and the Paper Units to 120.
* This configuration means that 1 unit in the drawing will represent 120 units on paper, matching the desired scale.
* Save the New Scale:
* Click OK to save the new scale to the scale list.
* The new scale of 1" = 120' will now be available for use in the drawing.
References:
* AutoCAD Documentation on adding scales: Adding Scales
NEW QUESTION # 66
You start the EXTEND command.
You need to be able to trim several objects quickly without exiting the EXTEND command.
What should you do?
- A. Hold the Ctrl key while selecting the objects.
- B. Hold the Ctrl+Shift key while selecting the objects.
- C. Hold the Shift key while selecting the objects.
- D. Hold the Alt key while selecting the objects.
Answer: C
Explanation:
According to the AutoCAD for Design and Drafting documents1, the EXTEND command allows you to extend objects to meet the edges of other objects. To trim objects instead of extending them, you can hold down the Shift key while selecting the objects1. This will invoke the TRIM command within the EXTEND command.
https://autocadprojects.com/trim-and-extend-command/
NEW QUESTION # 67
One of the lines in the drawing is at a 30 degree angle. What's the quickest way to align the X-axis of the UCS to that line?
- A. Right-click the UCS icon, click Object, and then select an object in the drawing as the location.
- B. Start the UCS command and enter a coordinate.
- C. Start the UCSBASE command and set the new value
- D. Modify the properties of the UCS icon from Properties palette.
Answer: A
Explanation:
UCS is a command that sets a new user coordinate system (UCS) by specifying points or by selecting an object. You can use the Object option to align the UCS with a selected object such as a line.
Based on 3 and 4, UCSBASE is a system variable that sets the name of the current UCS base. PLINEGEN is a system variable that controls how linetype patterns are generated around vertices. LWEIGHT is a command that sets the current lineweight, which is used for new objects and affects objects in the current space only.
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2016/ENU/AutoCAD
https://knowledge.autodesk.com/support/autocad/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/AutoCAD
NEW QUESTION # 68
You have two viewports at different viewport scales as shown in the exhibit. The geometry and dimensions were created in model space.
The viewport scales are 1 16 and 1:5. The dimension text height is the same for both viewports in the layout.
Evaluate the graphic and complete the statements by selecting the correct options from the drop-down lists.
Answer:
Explanation:
Explanation
Box 1 = annotative
an annotative dimension style is a dimension style that automatically adjusts the size of dimensions based on the viewport scale. An annotative dimension style has an icon next to its name in the Dimension Style Manager dialog box. The dimension style is annotative because the dimension text height is the same for both viewports in the layout, even though they have different viewport scales1.
Box 2 = associativeThe DIMASSOC is at its default value of 2, therefore the dimensions are associative because they are linked to and update with the measured geometry3.
NEW QUESTION # 69
You start the EXTEND command.
You need to be able to trim several objects quickly without exiting the EXTEND command.
What should you do?
- A. Hold the Ctrl key while selecting the objects.
- B. Hold the Ctrl+Shift key while selecting the objects.
- C. Hold the Shift key while selecting the objects.
- D. Hold the Alt key while selecting the objects.
Answer: C
Explanation:
Explanation
According to the AutoCAD for Design and Drafting documents1, the EXTEND command allows you to extend objects to meet the edges of other objects. To trim objects instead of extending them, you can hold down the Shift key while selecting the objects1. This will invoke the TRIM command within the EXTEND command.
https://autocadprojects.com/trim-and-extend-command/
NEW QUESTION # 70
You need to convert the two sets of parallel lines shown in 1 into the objects shown in 2 without repeating the command.
What should you use?
- A. The FILLET command with the Polyline option
- B. The CHAMFER command with the Multiple option
- C. The CHAMFER command with the Polyline option
- D. The FILLET command with the Multiple option
Answer: B
Explanation:
Explanation
According to the AutoCAD for Design and Drafting documents, the CHAMFER command creates a beveled corner between two lines, while the FILLET command creates a rounded corner between two lines. Both commands can be used with the Polyline option to apply chamfers or fillets to all corners of a 2D polyline1.
However, in this case, the lines are not polylines but separate line segments. Therefore, using the Polyline option will not work. Instead, you can use the Multiple option to chamfer or fillet multiple sets of lines without restarting the command2.
NEW QUESTION # 71
You are modifying an AutoCAD drawing for a customer.
You would like to bring your customers attention to a specific area of the drawing that you modified for review.
Which type of object is conventionally used?
- A. A solid hatch
- B. A revision cloud
- C. A construction line
- D. A viewport
Answer: B
Explanation:
The type of object that is conventionally used for this purpose is D. A revision cloud123. A revision cloud is a way to highlight changes or revisions in a drawing by creating a cloud-shaped polyline around them12. You can create a revision cloud by moving the mouse or by converting existing objects2. You can also change the style, color, layer and properties of the revision cloud13.
NEW QUESTION # 72
Tors project area to be completely visible on a sheet, a custom drawing scale of 1: 120 is added to the drawing After the drawing content is positioned in the viewport using the new drawing scale for the viewport's annotation and standard scales, all annotative objects m the viewport disappear.
No changes are made to the layers within the viewport
What should be done to make the annotative objects visible in the newly scaled viewport?
- A. Move the annotative objects to a new layer named 1.120.
- B. Set the annotation monitor to OFF within the viewport.
- C. Add the 1-120 scale to annotative objects in model space.
- D. Select annotative objects and sot multiple scale positions
Answer: C
Explanation:
* Understanding Annotative Objects:
* Annotative objects in AutoCAD are designed to automatically adjust their size based on the viewport scale to ensure readability.
* Issue with Custom Drawing Scale:
* When a new custom scale (1:120) is applied, annotative objects disappear if they are not configured to support the new scale.
* Options to Resolve the Issue:
* Option A: Turning off the annotation monitor within the viewport does not resolve scale issues.
* Option B: Moving objects to a new layer does not affect their annotative properties.
* Option D: Setting multiple scale positions is a partial solution but does not directly address the missing scale.
* Correct Solution:
* Option C: Adding the 1:120 scale to the annotative objects in model space ensures that these objects recognize and adjust to the new scale within the viewport.
* Steps to Add Scale:
* Select annotative objects in model space.
* Right-click and choose "Annotative Object Scale" from the context menu.
* Add the new scale (1:120) to ensure objects appear correctly in the viewport.
References:
* AutoCAD Help Documentation on Annotative Objects and Scaling.
* AutoCAD 2024 User Guide on Managing Annotative Properties.
NEW QUESTION # 73
You want to print a copy of a floor plan with all the interior objects hidden. You already have a polyline drawn around the footprint of the plan.
Complete the statements by selecting the correct option from the drop-down,lists.
Answer:
Explanation:
Explanation
BOX 1 = WIPEOUT command with the Polyline option2.BOX2 = DRAWORDER command23
https://forums.autodesk.com/t5/autocad-forum/polyline-plan-view-boundary-of-point-cloud/td-p/6251860
NEW QUESTION # 74
A company's central server holds project directories that contain drawings. Team members who work onsite copy a directory locally to work offline.
Users often report that external references (xrefs) cannot be loaded after copying the project directories to their local machine from the company's central server.
How should you make sure that the users can load the xrefs without error?
- A. Set the external references to use relative paths
- B. Set the external references to use absolute paths
- C. Set the Reference Type of the xrefs to Attachment
- D. Set the Reference Type of the xrefs to Overlay
Answer: A
Explanation:
Explanation
the external references use relative paths to load them without error after copying them locally from a central server. This way, you can avoid broken links due to changes in drive letters or folder names.
https://grabcad.com/tutorials/working-with-external-references-xrefs-autocad
NEW QUESTION # 75
In model space (MODEL), a room label text height is set to 300 mm in the designated text style.
Which viewport scale should you apply to a layout viewport (PAPER) so that the room label text height will display as 3 mm when plotting the drawing?
- A. 1:100
- B. A custom viewport scale
- C. 1:1
- D. 100:1
Answer: D
Explanation:
Explanation
the formula for determining object scaling is:
Object Height x Annotation Scale x Annotation Plot Size = Model Space or Paper Space Height In this case, we want the room label text height to be 3 mm in paper space when plotting the drawing.
Assuming an annotation plot size of 1 mm and an object height of 300 mm, we can solve for the annotation scale as follows:
300 x Annotation Scale x 1 = 3 Annotation Scale = 3 / 300 Annotation Scale = 0.01 Therefore, the viewport scale that corresponds to this annotation scale is B. 100:1.
https://knowledge.autodesk.com/support/autocad-architecture/learn-explore/caas/CloudHelp/cloudhelp/2016/EN
NEW QUESTION # 76
......
Autodesk ACP-01101 certification exam is an excellent way for professionals to demonstrate their AutoCAD skills and knowledge. It is a valuable credential that can enhance career opportunities and open up new job prospects. By passing the exam, candidates can gain recognition for their expertise and become part of a community of certified professionals.
Autodesk ACP-01101 certification exam covers a wide range of topics, including creating and editing objects, working with layouts and views, annotating drawings, and collaborating with others. ACP-01101 exam also tests the individual's ability to customize and automate AutoCAD software, which is an essential skill for professionals who need to increase their productivity and efficiency.
Fully Updated Dumps PDF - Latest ACP-01101 Exam Questions and Answers: https://officialdumps.realvalidexam.com/ACP-01101-real-exam-dumps.html
