Pass Your Next NSE6_FSW-7.2 Certification Exam Easily & Hassle Free
Free Fortinet NSE6_FSW-7.2 Exam Question Practice Exams
Fortinet NSE6_FSW-7.2 exam covers a range of topics, including Virtual LANs (VLANs), Spanning Tree Protocol (STP), Link Aggregation Control Protocol (LACP), and FortiLink. NSE6_FSW-7.2 exam further tests the ability of individuals to configure and manage FortiSwitches in various network environments, such as Layer 2 and Layer 3 networks. NSE6_FSW-7.2 exam also evaluates the ability of individuals to troubleshoot common network problems.
NEW QUESTION # 29
Which two statements about 802.1X authentication on FortiSwitch ports are true? (Choose two.)
- A. A local user database must be used to authenticate devices using the 802.1X authentica-tion protocol.
- B. A security policy is used to apply 802.1 authentication on a port.
- C. All hosts behind an authenticated port are allowed access after a successful authentica-tion.
- D. All devices connecting to FortiSwitch must support 802.1X authentication.
Answer: B,C
NEW QUESTION # 30
Which is a requirement to enable SNMP v2c on a managed FortiSwitch?
- A. Configure SNMP agent and communities.
- B. Create an SNMP user to use for authentication and encryption.
- C. Specify an SNMP host to send traps to.
- D. Enable an SNMP v3 to handle traps messages with SNMP hosts.
Answer: A
NEW QUESTION # 31
Which statement about the use of the switch port analyzer (SPAN) packet capture method is true?
- A. Mirrored traffic can be sent across multiple switches.
- B. The monitoring device must be connected to the same switch where the traffic is being mirrored
- C. Traffic on the management interface can be mirrored and captured by the monitoring device.
- D. SPAN can be configured only on a standalone FortiSwitch.
Answer: C
NEW QUESTION # 32
Exhibit.
What conditions does a FortiSwitch need to have to successfully configure the options shown in the exhibit above? (Choose two.)
- A. The CLI commands are enabling a splitpo rt into four 10Gbps interfaces.
- B. The FortiSwitch model is equipped with a maximum of 54 interfaces.
- C. The split port can be assigned to native VLAN
- D. The port full speed prior the split was 100G SFP+
Answer: A,B
NEW QUESTION # 33
Which statement about the quarantine VLAN on FortiSwitch is true?
- A. FortiSwitch can block devices without configuring quarantine VLAN to be part of the allowed VLANs.
- B. Quarantine VLAN has no DHCP server
- C. It is only used for quarantined devices if global setting is set to quarantine by VLAN.
- D. Users who fail 802.1X authentication can be placed on the quarantine VLAN.
Answer: C
NEW QUESTION # 34
How does FortiGate handle configuration of flow tracking sampling if you export the settings to a managed FortiSwitch stack with sampling mode set to perimeter is true?
- A. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces, except ICL and ISL interfaces.
- B. FortiGate configures and enables egress sampling on all management interfaces.
- C. FortiGate configures FortiSwitch to perform ingress sampling on all switch interfaces.
- D. FortiGate configures and enables flow sampling on FortiSwitch but does not change existing sampling settings of interfaces.
Answer: A
NEW QUESTION # 35
Exhibit.
Two routes are not installed in the forwarding information base (FIB) as shown in the exnibit. Which two statements about these two route entries are true? (Choose two.)
- A. These two routes will become primary, if the best routes are removed.
- B. These two routes are available in the hardware routing table.
- C. These two routes have a higher administrative distance value available to the destina-tion networks.
- D. These two routes will be used as load-balancing routes.
Answer: A,C
NEW QUESTION # 36
Which two statements about the FortiLink authorization process are true? (Choose two.)
- A. FortiSwitch requires a reboot to complete the authorization process.
- B. A FortiLink frame is sent by FortiGate to FortiSwitch to complete the authorization.
- C. FortiLink authorization sets the FortiSwitch management mode to FortiLink.
- D. The administrator must manually pre-authorize FortiGate on FortiSwitch by adding the FortiGate serial number.
Answer: B,C
NEW QUESTION # 37
Which statement about using MAC, IP, and protocol-based VLANs on FortiSwitch is true?
- A. Endpoints are required to use the same FortiSwitch port to remain members of the VLAN.
- B. It provides benefits that can be obtained when using 802.1X authentication.
- C. FortiSwitch uses only the Ethernet type to assign traffic to VLANs.
- D. lt is a scalable and secure solution in comparison to other Layer 2 security measures.
Answer: B
NEW QUESTION # 38
How is traffic routed on FortiSwitch?
- A. FortiSwitch looks up the hardware routing table and then the forwarding information base (FIB).
- B. Hardware-based routing on FortiSwitch is handled by the CPU.
- C. ASIC hardware routing can only handle dynamic routing, if supported.
- D. Layer 3 routing can be configured on FortiSwitch, while managed by FortiGate.
Answer: A
NEW QUESTION # 39
Which interfaces on FortiSwitch send out FortiLink discovery frames by default in order to detect a FortiGate with an enabled FortiLink interface?
- A. No ports are enabled by default for auto-discovery. This must be configured under config switch interface.
- B. The last four switch ports on FortiSwitch have auto-discovery enabled by default.
- C. The ports with auto-discovery enabled by default are dependent upon the FortiSwitch model.
- D. All ports have auto-discovery enabled by default.
Answer: D
NEW QUESTION # 40
Which LLDP-MED Type-Length-Values does FortiSwitch collect from endpoints to track network devices and determine their characteristics?
- A. Location
- B. Power management
- C. Inventory management
- D. Network policy
Answer: C
NEW QUESTION # 41
Which drop policy mode, if assigned to a congested port, will drop incoming packets until there is no congestion on the egress port?
- A. Tail-drop mode
- B. Weighted round robin mode.
- C. Random early detection mode
- D. Strict mode
Answer: A
NEW QUESTION # 42
Exhibit.
port24 is the only uplink port connected to the network where access to FortiSwitch management services is possible. However, FortiSwitch is still not accessible on the management interface. Which two actions should you take to fix the issue and access FortiSwitch? (Choose two.)
- A. You must add VLAN ID 200 to the allowed VLANS on internal.
- B. You must add port24 native VLAN as an allowed VLAN on internal.
- C. You must allow VLAN ID 4094 on port24, if management traffic is tagged.
- D. You should use VLAN ID 4094 as the native VLAN on port24.
Answer: C,D
NEW QUESTION # 43
Refer to the exhibit.
What two conclusions can be made regarding DHCP snooping configuration? (Choose two.)
- A. Maximum value to accept clients DHCP request is configured as per DHCP server range.
- B. Global configuration for DHCP snooping is set to forward DHCP client requests on all ports in the VLAN.
- C. FortiSwitch is configured to trust DHCP replies coming on FortiLink interface.
- D. DHCP clients that are trusted by DHCP snooping configured is only one.
Answer: C,D
NEW QUESTION # 44
Exhibit.
port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
- A. Oport1 was shut down by loop guard protection.
- B. Loop guard frame sourced from port 1 was received VLAN 10 ports.
- C. STP triggered a loop and applied loop guard protection on port1.
- D. An endpoint sent BPDU on port1 it received from another interface.
Answer: A,B
NEW QUESTION # 45
What can an administrator do to maintain a FortiGate-compatible FortiSwitch configuration when changing the management mode from standalone to FortiLinK?
- A. FortiGate automatically saves the existing FortiSwitch configuration during the FortiLink management process.
- B. Register FortiSwitch to FortiSwitch Cloud to save a copy before managing with FortiGate.
- C. Enable the FortiLink setting on FortiSwitch before the authorization process.
- D. Use a migration tool based on Python script to convert the configuration.
Answer: B
NEW QUESTION # 46
Exhibit.
The exhibit shows the current status of the ports on the managed FortiSwitch.
Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?
- A. Port23 is configured as the dedicated management interface.
- B. Port23 is a member of a trunk that uses the Access-1 FortiSwitch senal number as the name of the trunk.
- C. Ports connect to adjacent FortiSwitch devices will show their.serial number as the na-tive VLAN
- D. A standalone switch with the showm serial number is connected on por123.
Answer: C
NEW QUESTION # 47
Refer to the exhibits.
You are asked to ensure that managed FortiSwitch devices are reachable by other devices, such as SNMP and other management tools across your network.
Which setting must you configure to ensure traffic from other devices in the network reaches FortiSwitch?
- A. Select a specific default gateway provided to FortiSwitch as an upstream device.
- B. Change the FortiLink interface IP address and DHCP server address range.
- C. Enable NAC settings to select the onboarding VLAN.
- D. Recreate the FortiLink interface with a nonaggregate setting.
Answer: B
NEW QUESTION # 48
Exhibit.
LAG and MCLAG are used to increase the available network bandwidth and enable redundancy. How does spanning tree protocol see MCLAG and LAG if they are configured based on the physi-cal view shown in the exhibit? (Choose two)
- A. Switch 1 and Switch 2 both seen as one single switch.
- B. Switch 1. Switch 2, and Switch 3 are seen as one MCLAG peer group
- C. Switch 3 and switch 4 are seen as one MCLAG switch client
- D. Switch 3 and Switch 4 uplinks are treated as single interfaces.
Answer: A,C
NEW QUESTION # 49
Which two statements about DHCP snooping enabled on a FortiSwitch VLAN are true? (Choose two.)
- A. By default, all FortiSwitch ports are set to forward client DHCP requests to untrusted ports.
- B. Settings related to DHCP option 82 are only configurable through the CLI
- C. switch-controller-dhcp-snooping-verify-mac verifies the destination MAC address to protect against DHCP exhaustion attacks.
- D. Enabling DHCP snooping on a FortiSwitch VLAN ensures requests and replies are seen by all DHCP servers.
Answer: A,B
NEW QUESTION # 50
What is the role of a device that is simultaneously functioning as both the distribution and core in the hierarchy network model?
- A. HA backup FortiGate managing FortiSwitch
- B. FortiSwitch functioning as standalone
- C. POE with high density FortiSwitch
- D. FortiGate managing FortiSwitch
Answer: D
NEW QUESTION # 51
......
Ace NSE6_FSW-7.2 Certification with 56 Actual Questions: https://officialdumps.realvalidexam.com/NSE6_FSW-7.2-real-exam-dumps.html
