HQT-4180 PDF Download Jan-2023 Hitachi Test To Gain Brilliante Result! Provide Updated Hitachi HQT-4180 Dumps as Practice Test and PDF Hitachi HQT-4180 Exam Syllabus Topics: TopicDetailsTopic 1Describe the different VSP midrange storage systems models and their specifications System architectureTopic 2Describe the installation and initial configuration procedures for VSP midrange storage systems System [...]

[Q15-Q33] HQT-4180 PDF Download Jan-2023 Hitachi Test To Gain Brilliante Result!

Share

HQT-4180 PDF Download Jan-2023 Hitachi Test To Gain Brilliante Result!

Provide Updated Hitachi HQT-4180 Dumps as Practice Test and PDF


Hitachi HQT-4180 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Describe the different VSP midrange storage systems models and their specifications
  • System architecture
Topic 2
  • Describe the installation and initial configuration procedures for VSP midrange storage systems
  • System Installation
Topic 3
  • Describe the back-end hardware components of VSP midrange storage systems
  • Identify the VSP midrange storage systems documentation
Topic 4
  • Describe how program products are enabled on VSP midrange storage systems
  • Describe the back-end architcture of VSP midrange storage systems
Topic 5
  • Describe the VSP midrange storage systems drive sparing technology and concepts
  • Back-end Architecture

 

NEW QUESTION 15
What is the recommended RAID level when creating a Hitachi Dynamic Provisioning (HDP) pool?

  • A. RAID 6
  • B. RAID 5
  • C. RAID 1+0
  • D. RAID 1

Answer: C

 

NEW QUESTION 16
You have to perform a firmware update containing new code for DKCMain, CHBs and drives on a VSP G900.
What are two requirements? (Choose two.)

  • A. The Microprocessor utilization should be below 50%.
  • B. There should be no sparing processes running in the background.
  • C. The CHBs must be updated first.
  • D. The Cache Write Pending rate should be below 30%.

Answer: B,C

 

NEW QUESTION 17
What are two consequences when a "New Installation" procedure is performed on a VSP Midrange system? (Choose two.)

  • A. The SVP drive is formatted.
  • B. The MPC software is updated.
  • C. All the data on RAID groups is lost.
  • D. The license keys are deleted.

Answer: A,C

 

NEW QUESTION 18
You are installing a new VSP G700 and are using the Initial Setup Wizard (ISW) for the network configuration.
Which set of IP addresses is configured with the ISW?

  • A. IP addresses of maintenance ports
  • B. IP addresses of management ports
  • C. IP addresses of all the ports and of the SVP
  • D. IP addresses of all the ports

Answer: B

 

NEW QUESTION 19
A customer wants to upgrade their VSP E790 with a SAS Expansion feature.
What are three requirements? (Choose three.)

  • A. Drive Boxes (DBs) with SAS interface have to be added.
  • B. Slots B of both controllers must be available for DKB installation.
  • C. Two additional Disk Boards (DKBs) have to be installed.
  • D. In Shared Memory, the Extension1 has to be enabled.
  • E. The SAS Expansion license has to be installed.

Answer: A,C,E

 

NEW QUESTION 20
How many batteries does a VSP E1090 have per controller (CTL)?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

 

NEW QUESTION 21
What are two valid back-end SAS cable connections on a VSP midrange system? (Choose two.)

  • A. from DKA to SSW
  • B. from DKB to ENC
  • C. from ENC to ENC
  • D. from DKA to DKB

Answer: B,D

 

NEW QUESTION 22
You need to replace a failing power supply (PS) in a VSP E590.
What is the correct procedure?

  • A. Check if the status of the PS is blocked, and if yes, then replace it directly.
  • B. Use the Maintenance Utility for blocking the PS, then replace it.
  • C. Use the Maintenance Utility for blocking the controller, then replace the PS.
  • D. Use the MPC for blocking the PS, then replace it.

Answer: D

 

NEW QUESTION 23
Which two VSP systems support attached Drive Box Flash (DBF)? (Choose two.)

  • A. VSP E590
  • B. VSP F370
  • C. VSP F700
  • D. VSP G900

Answer: A,C

 

NEW QUESTION 24
Which two statements are correct when adding cache to a VSP E590? (Choose two.)

  • A. CMG0 and CMG1 must have the same DIMM type.
  • B. Cache modules must be installed in CMG1.
  • C. This is not supported online.
  • D. Cache Modules must be installed on the CM board.

Answer: A,B

 

NEW QUESTION 25
A customer wants to change a production RAID Group from RAID 5 (7D+1P) to RAID 6 (6D + 2P) on a VSP G700 during normal operations. They have just unmapped the LUNs from the channel ports.
What needs to be performed next?

  • A. The RAID level must be changed in the SVP Maintenance window.
  • B. The RAID Group must be deleted.
  • C. The RAID 5 Group must be put into DRU mode in Storage Navigator.
  • D. The RAID level must be changed in Storage Navigator.

Answer: A

 

NEW QUESTION 26
A customer wants to upgrade a VSP G700 to 512 GB RAM capacity.
What is the valid CFM configuration?

  • A. two BM35 per controller
  • B. two BM35 per system
  • C. one BM45 per controller
  • D. two BM45 per controller

Answer: D

 

NEW QUESTION 27
Which tool monitors a VSP E590 system and reports System Information Messages (SIMs)?

  • A. Hitachi Remote Ops SVP Agent
  • B. Hitachi Ops Center Protector
  • C. Storage Navigator
  • D. Hitachi Remote Ops Monitor Agent

Answer: B

 

NEW QUESTION 28
Which tool do you use to install license keys on a VSP G370 system?

  • A. Maintenance Utility
  • B. HSA Embedded
  • C. MPC Software
  • D. Storage Navigator

Answer: A

 

NEW QUESTION 29
......

HQT-4180 Dumps are Available for Instant Access: https://officialdumps.realvalidexam.com/HQT-4180-real-exam-dumps.html