Feb-2023 Realistic 300-615 Accurate & Verified Answers As Experienced in the Actual Test!
Latest Cisco 300-615 Practice Test Questions, Troubleshooting Cisco Data Center Infrastructure Exam Dumps
For more info visit:
Cisco-training-video Certification Exam Policies Cisco Modeling labs Cisco Virtual Internet Routing Lab Personal Edition (VIRL PE)
Standard Exam Characteristics
The exam tries to impart validated cognizance on subject matters like networking, computing, automation, and operations. It contains multiple-choice questions, and the allotted time duration is 90 minutes.
The test can only be taken in the English language presently and is available globally via physical centers and an online proctoring facility. Pearson VUE is the Cisco’s partner and administers 300-615 test, so one has to register on their website to sit for it. Also, a fee of $300 is required and should be paid as an exam voucher.
The score you gain comes with a three-year validity. Then, one needs to fulfill the recertification requirements to continue enjoying the benefits of being accredited.
NEW QUESTION 75
Refer to the exhibit.
The vPC between switch1 and switch2 does not work. Which two actions resolve the problem? (Choose two.)
- A. Configure the IP address on the interface.
- B. Match the vPC domain ID between the two devices.
- C. Configure one of the switches as primary for the vPC.
- D. Activate VLANs on the vPC.
- E. Correct the configuration of the vPC peer link and the vPC peer keepalive.
Answer: B,E
Explanation:
Explanation
Both "vPC peer link" and "Peer keepalive link" are down. So, D is correct.
SW1 is using vPC domain ID 500, which SW2 is using 20. They must match. So, E is correct.
NEW QUESTION 76
DRAG DROP
Drag and drop the Cisco UCS SNMP fault types from the left onto the correct issues on the right.
Select and Place:
Answer:
Explanation:
Section: Compute Platforms
NEW QUESTION 77
An engineer must configure Linux hosts that are deployed on Cisco UCS B-Series Servers to boot from SAN. The SAN boot policy is configured in Cisco UCS Manager, and the boot order is verified to be set as expected However, the Linux hosts fail to boot. Which action resolves the issue?
- A. Remove all of the ISO images that are mounted as a virtual CD-ROM
- B. Remove all of the local storage that is installed
- C. Delete and reconfigure the boot LUN
- D. Delete and reconfigure the pWWN of the SAN boot target
Answer: B
NEW QUESTION 78
Refer to the exhibit.
An engineer must connect N2K-Fex-1 and N5K-Core-1 so that the traffic flow between the two devices uses load balancing. After inspecting the statistics of the interconnecting interfaces, the engineer concludes that only one link is used. Which action resolves the problem?
- A. Configure each uplink to be a member of a separate LACP port channel.
- B. Configure source-destination load balancing on N5K-Core-1.
- C. Configure destination-mac load balancing on N5K-Core-1
- D. Configure the pinning max-link as 2.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/m/en_us/techdoc/dc/reference/cli/n5k/commands/pinning-max-links.html
NEW QUESTION 79
Refer to the exhibit.
A network engineer configures OSPF protocol between two Cisco Nexus 7000 Series Switches. The OSPF neighbors fail to synchronize OSPF databases. Which action resolves the issue?
- A. Match the OSPF area between the two devices.
- B. Configure the IP addresses of the interface in the same subnet.
- C. Change the OSPF area type to 2 on n7k-1.
- D. Set the same MTU values on both sides of the link.
Answer: D
NEW QUESTION 80
When the engineer runs the command, this error is received:
opsengineer@wkst1:/home/auto/bash_scripts$ curl -s -b cookie_file_39422186.txt -X GET -k
192.15.132.101/api/node/class/Tenant.json
{"totalCount":"1","imdata":[{"error":{"attributes":{"code":"400","text":"Request failed, (output omitted)"}}}]} Which action resolves the issue?
- A. Add the -c class Tenant flag to the cURL command
- B. Modify the URI to 192.15.132.101/api/node/class/fvTenant.json
- C. Regenerate the API token object
- D. Change the HTTP verb to POST
Answer: B
NEW QUESTION 81
Refer to the exhibit.
An engineer is troubleshooting the connectivity between Server-1 and Server-2. Which action resolves the connectivity issue?
- A. Enable BGP advertise pip feature on both leaf switches
- B. Classify CFS messages for strict priority queue on spine switches
- C. Configure the same source IP address on NVE and virtual peer link on leaf switches
- D. Change all ports on spine switches as port-type fabric
Answer: B
NEW QUESTION 82
Refer to the exhibit.
The cURL command fails to complete. Which action resolves the problem?
- A. Include -p "password" in the command.
- B. Change ".json" to ".xml" at the end of the URL.
- C. Add -H "X-Auth-Token" to the command.
- D. Remove ".json\" from the URL.
Answer: A
NEW QUESTION 83
During a boot process of a Cisco UCS C-Series Rack Server, an engineer receives a "No Signal" message from the vKVM and physical connection. Which set of steps resolves the issue?
- A. 1- Power off the server and disconnect the power cord
2- Confirm that all cards are property seated
3- Connect the power cord and power on the server - B. 1- Power off the server and disconnect the power cord
2- Confirm that all cards are available
3- Connect the power cord and power on the server - C. 1- Disconnect the power cord
2- Confirm that all cards are property seated
3- Connect the power cord and power on the server - D. 1- Disconnect the power cord
2- Confirm that all cards are properly seated
3- Connect the power cord
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/ts/guide/b_C-Series_Troubleshooting_Guide.pd
NEW QUESTION 84
Refer to the exhibit.
A recent configuration change removes the HSRP adjacency between the SW-1 and SW-2 Cisco Nexus switches. The change causes the servers on this subnet to lose Internet access. Which action restores the connectivity of all servers on VLAN 13?
- A. Activate HSRP preempt on SW-2.
- B. Set the HSRP priority to 70 on SW-1.
- C. Set the HSRP password on SW-2.
- D. Disable HSRP IP redirects on SW-1.
Answer: A
NEW QUESTION 85
Refer to the exhibit.
A customer network uses OSPFv2 and MP-BGP protocols A network administrator installs a new Cisco Nexus Switch in the data center but experiences a BGP RIB failure Which action solves the issue?
- A. Change the administrative distance of OSPF to 220
- B. Use a filter list for OSPF to filter both routes
- C. Implement next-hop-self
- D. Configure the route as a BGP backdoor
Answer: A
NEW QUESTION 86
Refer to the exhibit.
The HSRP configuration in the exhibit fails to function. Which action resolves this issue?
- A. Configure the same HSRP group on both devices.
- B. Enable IP redirects.
- C. Configure HSRP version 2.
- D. Set the MTU to 1500 bytes.
Answer: B
NEW QUESTION 87
Refer to the exhibit.
The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?
- A. The SFP is unsupported.
- B. Trunk mode must be activated.
- C. VSAN 1 is suspended.
- D. The interface is in an incorrect mode.
Answer: C
NEW QUESTION 88
Refer to the exhibit.
Refer to the exhibits. An engineer is implementing the SAN based on the Cisco MDS 9000 Series Switches. When operating the environment, the engineer encounters the error shown. Which action resolves the issue?
- A. Copy VSAN 101 to the fabric binding database on the MDS-1 switch
- B. Configure the port security feature on the MDS-1 switch
- C. Add the World Wide Name of the neighboring switch to the MDS-1 switch
- D. Enable VSAN 101 on the peer MDS 2 switch fabric interconnect
Answer: C
Explanation:
Reference:
https://overlaid.net/2014/08/22/fc-security-for-ccie-dc-fabric-binding/
NEW QUESTION 89 
Refer to the exhibit. vPC between switch1 and switch2 is not working. Which two actions are needed to fix the problem? (Choose two.)
- A. Configure vPC peer link and vPC peer keepalive correctly.
- B. Activate VLANs on the vPC.
- C. Configure IP address on the interface.
- D. Configure one of the switches as primary for the vPC.
- E. Match vPC domain ID between the two devices.
Answer: B,E
Explanation:
Section: Network
NEW QUESTION 90 
Refer to the exhibit. An engineer is troubleshooting why user1, user2, and user3 from group STORAGE- ADMINISTRATOR in Microsoft Active Directory cannot log in to the Cisco MDS SSH CLI. Which action resolves the issue?
- A. Configure SSH logins on Cisco MDS switch.
- B. Configure the role name to match the group name on Microsoft Active Directory.
- C. Include specific users into MDS role configuration.
- D. Integrate Cisco MDS with Microsoft Active Directory.
Answer: B
Explanation:
Section: Storage Network
Explanation
NEW QUESTION 91
......
Obligatory Prerequisites
Though Cisco 300-615 is associated with the professional stage, there are no mandatory prerequisites to be met for becoming eligible. It is open for all. However, it won’t hurt if the test-taker has already explored the data center industry and has gained hands-on experience of about three to five years in generating these solutions.
Free 300-615 Exam Files Downloaded Instantly 100% Dumps & Practice Exam: https://officialdumps.realvalidexam.com/300-615-real-exam-dumps.html
